iDriver LED Driver

  Overview
The iDrive® range of high performance LED
drivers are the lighting industry’s perfect
solution for powering high-brightness LEDs
and LED arrays from a mains supply.
The new iDrive® DALI+ is one of the most
complete DALI ballasts available on the
market today and implements over 90 DALI
commands from the official DALI BS EN
62386-101:2009 standard, including Part 107,
which covers extended commands specifically
for LED ballasts.
The iDrive® DALI+ is no ordinary DALI driver;
in addition to a DALI interface, it incorporates
interfaces for 1-10V, ambient light and
temperature sensors, enabling the driver to
integrate advance control systems and further
reduce the carbon, energy and cost footprint
of lighting installations.
The iDrive® DALI+ implements smooth
constant current dimming support from 100%
to 0.3% of the output current, with the ability
to turn LEDs completely off. Employing a
continuous analogue dimming current, the
iDrive® DALI+ overcomes health and LED
flicker problems associated with driving LEDs
using PWM drivers.

The iDrive® DALI+ incorporates an advanced
microprocessor design to achieve up to 88%
efficiency and combines this with high quality
components to offer extended driver life. The
iDrive® DALI+ uses active power factor control
to optimise PFC > 0.9 at full load, whilst full
galvanic isolation ensures it meets Class II
double insulation requirements.
The iDrive® DALI+ comes in a compact design
and offers over 24 models, covering all of the
major LED and LED array vendors in a power
range from 10W to 42W, ensuring it is the most
comprehensive and high performance DALI
driver series yet. 

Electrical Specifcations
Input
• Input Voltage Range: 200V AC to 240V AC +/-10%
• Input Frequency: 47Hz to 63Hz
• Consumption: 12-48W max
• Power Factor: >0.9 @ full load
• Efficiency: Up to 88% typical @ full load
• AC Mains Connection: 5mm pitch screw terminals
• LED/IP Connector: 7 pole 3.5mm pitch screw terminals
• Insulation: Double insulated (Class II)
• Inrush Current: <2.3A
Output Options
• Output Voltage: +9V to +55V DC*
• Output Power: 42W max.*
• Line Regulation: 1% max.
• Load Regulation: 5% max.
Control Input
• Dimming Control: Standard DALI interface or 1-10V via
microprocessor
• DALI Connector: 2-pole 3.5mm pitch screw terminals
• Dimming Range: <0.3% to 100% of output load current
Mechanical
• Mounting: Two M4 screw mounting holes
• Construction: ABS Housing at IP 20
Environmental
• Operating Ambient Temperature: -20ºC to +50ºC
• Storage Ambient Temperature: -20ºC to +70ºC
• Relative Humidity: 85% max, non-condensing
• Maximum Case Temp. Tc: 80ºC
Protection
• Overload, OVP, Short Circuit and Open Circuit
Protectio
Recommended for:
DALI control of all Cogent Single Colour Downlights

Dimensions

Weight
• 0.184kg